Note (music)

From Citizendium
Revision as of 11:02, 15 June 2012 by imported>John R. Brews (→‎Notation: re-order material)
Jump to navigation Jump to search
This article is developing and not approved.
Main Article
Discussion
Related Articles  [?]
Bibliography  [?]
External Links  [?]
Citable Version  [?]
 
This editable Main Article is under development and subject to a disclaimer.
(PD) Image: John R. Brews
The amplitude of a musical note varies in time according to its sound envelope.[1]

In music, a note is an abstract representation of the pitch and duration of a tone. The pitch designated by a note is objective only in the case of a simple tone (also called a pure tone) such as produced by a tuning fork, which consists of only a single frequency of vibration, in which case the pitch is uniquely related to that frequency at a given loudness.[2]

A musical instrument on the other hand, produces a tone, which is a superposition of various frequencies with various amplitudes and phases peculiar to the instrument, and also affected by the manner of play that determines the sound envelope of the note (referred to by Lamb below as "adventitious circumstances"). A laboratory determination of pitch is made by a subject listening to a tone from a musical instrument and to a simple tone, such as that produced by a tuning fork, and identifying circumstances where the instrument and the simple tone sound alike.[3] As a result, for other than simple tones, pitch is not a purely objective physical property; it is a subjective psychoacoustical attribute of a sound.

To quote Lamb:[4]

One musical note may differ from another in respect of pitch, quality, and loudness. The pitch is usually estimated as that of the first simple-harmonic vibration in the series, viz. that of lowest frequency, but if the amplitude of this first component be relatively small, and especially if it fall near the lower limit of the audible scale, the estimated pitch may be that of the second component. By "quality" is meant that unmistakable character which distinguishes a note on one instrument from the note of same pitch as given by another...difference of quality, so far as it is not due to adventitious circumstances, can only be ascribed to differences of vibration-form, and so to differences in the relative amplitude and phases of the simple-harmonic constituents.

Such as the manner in which the sound sets in and ceases; this is different for instance in the violin and the piano.

What Lamb refers to as "quality" of a tone also is referred to as timbre.

Notation

For more information, see: Musical notation.
(PD) Image: John R. Brews
Musical clefs arranged on a stave.

In Western musical notation, the pitch of a sound is indicated by the vertical position of the symbol for the note on a staff or stave, an array of parallel ledger lines, as shown in the figure. The absolute pitch denoted by a position on the stave is set by the key of the musical piece.

The names of the notes correspond to the first seven letters of the alphabet, applied to both lines and spaces, and also to the syllables Do, Re, Mi, Fa, Sol, La, Si, Do. The labeling associated with the lines on the stave is indicated, and the labels for the spaces follow alphabetically.[5]

Pure tones separated by an octave on the stave (that is, a combination of eight lines and spaces on the stave) are a factor of two different in frequency. A pitch between C and D, say, is called C-sharp (denoted C#) or D-flat (denoted D).

The symbol for the note indicates its duration. Examples are shown in the figure, with the longest or whole note at the bottom, and the two half notes above it that combine to the same duration. The quarter note, eighth notes and sixteenth notes are successively stacked above.[5]

The right-to-left position of the notes indicate the order in which they are played, the further to the right the later, with notes directly above one another played simultaneously.

The upper clef is called the treble or G-clef, and the lower clef is called the bass or F-clef.[6] The clefs serve to make clear which lines of the stave are meant when only a section of the eleven-line stave is shown.

References

  1. Stanley R. Alten (2010). “Sound envelope”, Audio in Media, 12th ed. Cengage Learning, p. 13. ISBN 049557239X. 
  2. The pitch of pure tones varies somewhat with sound level, perhaps by as much as 5% and varying with the individual listener. Susan Hallam, Ian Cross, Michael Thaut (2011). The Oxford Handbook of Music Psychology. Oxford University Press, p. 50. ISBN 0199604975. 
  3. Thomas D. Rossing (2007). Springer Handbook of Acoustics. Springer, p. 477. ISBN 0387304460. 
  4. Horace Lamb (2004). The Dynamical Theory Of Sound, Reprint of 1925 Edwin Arnold Ltd. 2nd ed. Courier Dover, p. 4. ISBN 048643916X. 
  5. 5.0 5.1 John Taylor (1876). “Appendix B: Notation”, The student's text-book of the science of music. George Philip and Son, pp. 88 ff. 
  6. F Leslie Jones (1874). “Chapter II: Musical notation”, A manual of the elements of vocal music. Oxford University Press, pp. 7 ff.