Locator-ID Separation Protocol: Difference between revisions

From Citizendium
Jump to navigation Jump to search
imported>Howard C. Berkowitz
(New article generated using Special:MetadataForm)
 
imported>Howard C. Berkowitz
No edit summary
 
(One intermediate revision by the same user not shown)
Line 1: Line 1:
{{subpages}}
{{subpages}}
The '''Locator-ID separation protocol (LISP)'''  is an experimental networking protocol  in the [[Internet Engineering Task Force]] draft stage.<ref>{{citation
| url = http://tools.ietf.org/id/draft-ietf-lisp-07.txt
| publisher = [[Internet Engineering Task Force]]
| author = D. Farinacci, V. Fuller,  D. Meyer, D. Lewis
| date =  25 April 2010
| title = Locator/ID Separation Protocol (LISP), draft-ietf-lisp-07
}}</ref> It allows incremental introduction of [[IPv6]] into the existing [[IPv4]] core, by separating the mapping of routing locators from endpoint identifiers. It also can be used purely for IPv6.
LISP was developed by [[Cisco Systems]] engineers, but is being developed as an open standard and Cisco takes no intellectual property rights. <ref>{{citation
| url = http://lisp4.cisco.com/LISP-FAQ.pdf
| title = Cisco LISP Frequently Asked Questions
| publisher = [[Cisco Systems]]}}</ref>
==References==
{{reflist}}

Latest revision as of 13:53, 25 March 2011

This article is developing and not approved.
Main Article
Discussion
Related Articles  [?]
Bibliography  [?]
External Links  [?]
Citable Version  [?]
 
This editable Main Article is under development and subject to a disclaimer.

The Locator-ID separation protocol (LISP) is an experimental networking protocol in the Internet Engineering Task Force draft stage.[1] It allows incremental introduction of IPv6 into the existing IPv4 core, by separating the mapping of routing locators from endpoint identifiers. It also can be used purely for IPv6.

LISP was developed by Cisco Systems engineers, but is being developed as an open standard and Cisco takes no intellectual property rights. [2]

References